Material Options
Heat-Resistant: materials for application-specific requirements such as flame smoke and toxicity, HDT or mold durability
Tough: impact-resistant resins for functional applications that need to perform under stress and high-load conditions
General Purpose: fast printing materials for end-use applications requiring cosmetic surfaces, fine features and high accuracy
Elastomers: resilient high-resolution elastomers for applications requiring excellent tear strength or rebound performance
Healthcare: medically certified materials for devices where aesthetics, durability and biocompatibility are critical.
 |
 |
 |
System Features
Build envelope (xyz):
192 x 108 x 370 mm / 7,672 cm3
(7.5 x 4.25 x 14.5 in. / 462 in3)
Maximum length on the diagonal – 220mm (8.6 in.)
Achievable Accurancy:
XY and Z tolerance of up to +/-50 μm for validated applications and +/- 100 μm in general
Repeatability:
>95% of prints are within +/-50* μm across printers and build heads*
*Between 25 μm – 200 μm layers with OpenAM™
Surface Finish:
Surface roughness of up to 2μm Ra*
Light Engine:
5K projector with 38.5 μm pixel size and tight 2.5 standard deviation projector uniformity
Wavelength:
385nm
Pre-Print Software:
GrabCAD Print™ or optional 3rd party solutions
Touchscreen printer user interface
Regulatory compliance:
CE, UKCA, FCC, RCM, NRTL [pending]
System size and weight:
Width: 50 cm (19.7 in.)
Depth: 52 cm (20.5 in.)
Height: 117 cm (46 in.)
Weight: 86 kg (189.5 lbs.)
Power requirements:
100-120 VAC, 50/60Hz, 7.1A, 1 Ph or
200-240 VAC, 50/60 Hz, 3.5 A, 1 Phe
Network connectivity:
Ethernet
Offline connectivity available with Origin Two Local
Ventilation:
Refer to photopolymer material MSDS or contact Stratasys rep for guidelines.
Operating conditions:
Operating Conditions Operating temperature in the range of 18 °C to 25°C (59°F to 86°F), with humidity range of 30% to 70%
Gas exhaust (optional):
Facility exhaust
Resin tray capacity:
2L
Resin storage temp:
Typically 15-30 °C (59-86 °F)
Printer authentication:
Cryptographically-secure handshake
Network security:
Industry-standard end-to-end encryption
Recommended Support Cleaning Systems:
PostProcess DEMI X 520 / Onulis CleanPoint
Recommended UV Curing Systems:
Origin Cure™ / Onulis Wrap Prime / Onulis CrossLink