P3 DLP Tough Materials
Below is a list of P3 DLP Tough Materials
//Durable, tough and impact resistant material, for functional applications that need to perform under stress and high load conditions.
LOCTITE® 3D 3172 High Impact by Henkel produces functional parts that require high stiffness with a good surface finish and high impact resistance. Attributes are similar to Polypropylene (PP). This material is impact-resistant and is ideal for tooling applications, manufacturing aids, brackets, jigs and fixtures, housings and consumer applications, such as insoles.
Key Features:
- Superior impact strength
- Good surface finish
- Parts can be machined, tapped, or polished
- Tested in QUV exterior weathering conditions (ASTM G-154) for 800 hours with less than a 15% change in tensile and impact properties
- Color: Grey, Cyan, Clear
LOCTITE 3D 3172 High Impact Compatibility
Download Material Data Sheet
//Great balance of strength, stiffness and toughness, with a stunning matte surface finish.
LOCTITE® 3D 3843 High Toughness by Henkel is a high-strength engineering polymer with good impact resistance and exceptional surface finish. Ideal for a wide variety of tools in the production floor. Attributes are similar to ABS. Ideal applications include functional production parts, enclosures, medical device housings or parts with Class A surface requirements.
Key Features:
- High heat deflection temperature, HDT 60°C (140°F)
- Tough with outstanding surface finish
- Superior strength and impact resistance
- Biocompatible
- Color: Black, clear
LOCTITE 3D 3843 High Toughness Compatibility
Download Material Data Sheet
//Clear photopolymer with a smooth surface finish and good impact resistance. Ideal for mechanical guides, fluid ducts, and microfluidic devices. Also suitable for light pipe and packaging prototyping.
LOCTITE® 3D IND405 Clear is a one-part semi-rigid 3D printable resin with good impact strength and elongation. IND405 comes off the printer frosted but can be polished to an optically clear finish. This material can be machined, tapped and polished, and is ideal for microfluidic devices as well as guide overlays. Based on its unique set of performance attributes, its qualities are most comparable to unfilled polypropylene.
Key Features:
- Good impact strength
- 120% elongation at break
- 52MPa ultimate tensile strength
- Heat deflection temperature: 53° C (127.4° F)
- Excellent surface quality
- Clear finish with secondary process
Loctite 3D IND405 Compatibility
Download Material Data Sheet
//Durable, impact-resistant photopolymer with an exceptional surface finish and a low cost per kg.
Dura56 was created by Stratasys and LOCTITE® to address end-use and prototyping applications with high material consumption. Ideal for housings, parts with mating features or class A surfaces. Print more for less without sacrificing quality or strength.
Key Features:
- 56 J/m notched Izod impact strength
- 78% elongation at break
- 44 MPa ultimate tensile strength
- Exceptional matte surface finish
- Low cost per part
Stratasys Dura56 Compatibility
Download Material Data Sheet