System Features
Build tray dimensions (XYZ):
1,000 x 610 x 610 mm (39.4 x 24 x 24 in.)
Maximum diagonal build length: 1,171 mm (46.1 in.)
Dimensional accuracy:
XY part accuracy: ± 0.254 mm or ± 0.002 mm/mm (± 0.010 in. or ± 0.002 in./in.), whichever is greater.
Z part accuracy: ± 0.200 mm or ± 0.002 mm/mm (± 0.008 in. or ± 0.002 in./in.), whichever is greater, plus one layer height.
Accuracy is geometry and material dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.
Layer thicknesses:
0.013 in (.330 mm): ABS-M30, ASA
0.010 in (.250 mm): Nylon 12CF, ABS-M30, ASA
0.007 in (.188 mm): ABS-M30, ASA
Material delivery:
Material Delivery Four 4,100 cm3 (250 in3) material spools with automatic material changeover. Shared consumable platform with Stratasys F3300.
Software:
GrabCAD Print™, GrabCAD Print Pro™, Insight™, Control Center™, MTConnect-enabled
Electrical requirements:
Three-phase, 208V, 30A, five-wire, 47-63Hz frequency
Recommended Cleaning Station:
CleanStation XL Plus / PostProcess VORSA 500 / PostProcess BASE
System size and weight:
175 x 124 x 196 cm (69 x 49 x 77 in.)
817 kg (1,800 lbs.)
Support structure:
SR-35 (soluble)
Regulatory compliance:
CE, cTUVus, RCM, EAC, FCC Part B
Operating environment:
Operating temperature: 15 °C to 30 °C (59 °F to 86 °F)
Operating humidity: 30 – 60%
Facility requirements:
Double-door width required for installation.
Minimum Clearance: 91 cm (36 in.) on the back and sides, 152 cm (60 in.) on the front, and 51 cm (20 in.) overhead of the printer
Installation requirements:
Forklift required for uncrating, installation and movement.
Crate dimensions: 186.7 x 146 x 225.4 cm (73.5 x 57.5 x 88.75 in.)
Crated Weight: 1,065 kg (2,350 lbs.)