System Features
Supported sterilization processes:
Steam (4 minutes at 132 °C), Gamma (25 – 50 kGy),
EtO (specifications available upon request)
Digital model materials:
Unlimited number of composite materials including over 500,000 colors
Support materials:
SUP710™ (Water Jet removable)
Build Tray:
Printing area: 1,174cm2
Max Part Size: Up to 140 x 200 x 190mm (5.51 x 7.87 x 7.48 in.)
Layer thickness:
Horizontal build layers down to 18 microns (0.0007 in.)
Accuracy:
Deviation from STL dimensions with rigid materials,based on size:
under 100 mm – ±150μ; above 100 mm – ±0.15% of part length.*
* true for 67% (1 sigma) models printed for future information can be found in the spec sheet
System size and weight:
651 x 661 x 1551mm (25.63 x 26.02 x 61.06 in.); 228 kg (503 lbs.)
Network connectivity:
LAN – TCP/IP
Power requirements:
100 – 240 VAC, 50 – 60 HZ, 10A, 1 phase
Regulatory compliance:
CE, FCC, EAC
Operating conditions:
Temperature 18 – 25 °C (64 – 77 °F); relative humidity 30-70% (non-condensing)
Software:
GrabCAD Print
Build modes:
High Quality Speed (HQS) – 18.75μm
Recommended support cleaning systems:
Oryx scaWaterjet / Oryx sca1200ht / Oryx sca3600 / PostProcess™ DEMI 200™ / PostProcess™ DEMI 400™