Material Options
- Vero Opaque (VeroCyanV, VeroMagentaV, VeroYellowV, VeroPureWhite, VeroBlackPlus, VeroUltra WhiteS & VeroUltra BlackS)
- Transparent (VeroClear RGD810, VeroUltra ClearS)
- Bio-compatible (Vero ContactClear)
- DraftGrey RGD750 High Speed mode material
- Flexible (Elastico Black, Elastico Clear)
- Digital ABS Plus Ivory (fabricated inside the 3D printer from RGD515 Plus and RGD535 or RGD531)
- High Impact Resistance ToughONE
- Digital Materials Combine two to five PolyJet photopolymers in specific concentrations and microstructures to create a composite material with hybrid characteristics
System Features
Build size/Printing area:
Up to 1,174 cm2 (182 in2)
Print Height: 190mm** (7.48 in.)**
Layer thickness:
Horizontal build layers down to 18 microns (0.0007 in.)
Build modes:
High Quality Speed (HQS): 18.75um
Accuracy:
Deviation from STL dimensions, for 1 Sigma (67%) of models printed with rigid materials, based on size: under 100 mm – ±150μ; above 100 mm – ±0.15% of part length.*
Deviation from STL dimensions, for 2 Sigma (95%) of models printed with rigid materials, based on size: under 100 mm – ±180μ; above100 mm – ±0.2% of part length.*
Support materials:
SUP710 (breakaway and water dissolving or waterjet)
WSS150 (water soluble)
Size and weight:
651 x 661 x 1551mm (25.63 x 26.02 x 61.06 in.); 228 kg (503 lbs.)
*Measured when ambient temperature is 23 °C and relative humidity is 50%.
**The maximal printable height is 187 mm (7.36 in).
Network connectivity:
LAN – TCP/IP
Power requirements:
100–120 VAC, 50–60 Hz, 6A, 1 phase
220–240 VAC, 50–60 Hz, 3A, 1 phase
Regulatory Compliance:
CE, FCC, EAC, cTUVus, CB, RCM
Operational environment:
Temperature 18 – 25 °C (64 – 77 °F); relative humidity 30-70% (non-condensing)
Recommended support cleaning systems:
Oryx scaWaterjet / PostProcess DEMI 430
Software:
GrabCAD Print™