System Features
Build envelope (XYZ):
1,000 x 610 x 610 mm / 372,000 cm3
(39.4 x 24 x 24 in. / 22,677 in3)
Maximum length on the diagonal – 1,171 cm (46.1 in.)
Achievable accuracy:
XY part accuracy = +/- 0.254 mm (+/- 0.010 in.) or +/- 0.002 mm/mm (+/- 0.002 in./in.), whichever is greater
Z part accuracy = +/- 0.200 mm (+/- 0.008 in.) or +/- 0.002 mm/mm (+/- 0.002 in./in.), plus 1 layer height
Layer thicknesses:
0.013 in (.330 mm): ASA, ABS-M30
0.010 in (.254 mm): ASA, ABS-M30
0.007 in (.178 mm): ASA, ABS-M30
Material delivery:
200 in3 coil box (3277 cm3)
Workstation compatibility:
Wired and wireless (with USB dongle) network interfaces using standard TCP/IP protocols at 100 MBPS minimum
Wireless network connectivity:
IEEE 802.11n-2009
IEEE 802.11g-2003
IEEE 802.11b-1999
Software:
GrabCAD Print, GrabCAD Print Pro, Insight, Control Center™, MTConnect enabled
Audible Noise/Acoustics:
54 dBA
Power requirements:
3 phase, 208V, 30A, 5 wire, 47-63Hz frequency
Recommended Cleaning Station:
Oryx sca3600 / CleanStation® XL Plus™
Size and weight:
175 x 124 x 196 cm (69 x 49 x 77 in.)
658 kg (1450 lbs.)
Support structure:
SR-30™ (soluble)
Regulatory compliance:
CE, cTUVus, RCM, EAC, FCC Part B
Operating conditions:
Operating temperature 15 °C to 30 °C (59 °F to 86 °F)
Operating Humidity 30-70%
99 cm (39 in.) clearance on each side of printer
Facility requirements:
Double-door width for installation, vacuum pump within system – no shop air required, forklift uncrating and installation
Installation requirements:
Crate = 186.7 cm W x 146 cm D x 225.4 cm H (73.5 in. W x 57.5 in. D x 88.75 in. H)
Crated weight = 907 kg (2000 lbs.)