Material Options
- PLA for quick concept and verification models with good tensile strength
- ABS-M30 in six colors for great tensile, impact and flexural strength
- ABS-CF10 for the stiffness of carbon fiber
- ASA for UV stability and the best aesthetics
- FDM TPU 92A for flexibility and stretch with abrasion and tear resistance (black, red)
System Features
Build size:
254 x 254 x 254 mm (10 x 10 x 10 in)
Layer thicknesses:
0.330 mm (0.013 in) ABS-M30, ABS-CF10, ASA
0.254 mm (0.010 in) PLA, ABS-M30, ABS-CF10, ASA, FDM TPU 92A
0.178 mm (0.007 in) ABS-M30, ABS-CF10, ASA, FDM TPU 92A
0.127 mm (0.005 in) ABS-M30, ABS-CF10, ASA
Material delivery:
2 material spool bays, 1 for model, 1 for support located in a drawer on the front of the unit
System Requirements:
Windows 7, 8, 8.1, and 10 (64bit only) with a minimum of 4GB RAM (8GB or more recommended)
Support Structure:
QSR support material
Software:
GrabCAD Print™, GrabCAD Print Pro™
Recommended support cleaning systems:
Oryx sca1200ht / PostProcess DEMI 430
Network connectivity:
Wired: TCP/IP protocols at 100MBPS minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless: IEEE 802.11n, g, or b; Authentication: WPA2-PSK, 802.1x EAP; Encryption: CCMP, TKIP
Size and weight:
1,626 x 864 x 711 mm (64 x 34 x 28 in.), 227 kg (500 lbs) with consumables
Power requirements:
100–132V/15A or 200–240V/7A. 50/60 Hz
Regulatory compliance:
CE, FCC, EAC, EMC (low-voltage directive), CE, TUV, FCC, RC, RCM, EAC, RoHs, WEEE, Reach
Special facility requirements:
None