Advanced Tek logo
Linkedin logo

F3300 3D Printer

//Minimal labor, lower cost, faster throughput.

View Image Gallery

Material Options

  • ASA for UV stability and the best aesthetics
  • PC for superior mechanical properties and heat resistance
  • FDM Nylon 12CF for the highest strength and stiffness-to-weight ratio
  • ULTEM 9085 for best mix of mechanical, chemical and thermal properties

Order Materials

System Features

Build tray dimensions (XYZ):
600 x 600 x 800 mm (23.6 x 23.6 x 31.5)


Achievable accuracy:
+/- .067 mm or +/- .0015 mm per mm, whichever is greater
(+/- .0026 in. or +/-.0015 in. per in., whichever is greater).
Z part accuracy includes an additional tolerance of -0.000/+ slice height.


Layer thicknesses:
0.020 in (.500 mm):  ASA, PC, FDM Nylon 12CF, ULTEM 9085
0.010 in (.250 mm):   ASA, PC, FDM Nylon 12CF, ULTEM 9085
0.007 in (.188 mm):  ASA


Material delivery:
4 material spool bays feeding 4 extruders; mix-and-match model or support;
independently controlled onboard material dryers included (120 °C max temp)


GrabCAD Print™, GrabCAD Print Pro™, Insight™, MTConnect enabled


Onboard cameras:
Two (2) cameras – front-mounted showing extruder level and rear-mounted showing full chamber view


Power requirements:
208V, 3 PH, 30A dedicated circuit, 50/60 Hz, 5-wire (L-L-L-N-G)


Recommended Cleaning Station:
CleanStation® XL Plus™ / PostProcess® VORSA™ 500 / PostProcess BASE™


Size and weight:
Width: 203.2 cm (80 in.)
Depth: 162.6 cm (64 in.)
Height (with light tower): 236.2 cm (93 in.)
Height (without light tower): 218.4 cm (86 in.)
Weight: 1360 kg (3000 lbs)

Support structure:
SR-35 (soluble) for ASA; SR-110 (soluble) for PC and Nylon 12CF; SUP8500B (breakaway) for ULTEM 9085


Regulatory compliance:
CE (Machinery Directive & EMC) 2006/42/EC, cTUVus, FCC Part B


Operating environment:
System operating temperature shall be in the range of 15 °C to 30 °C (60 °F to 86 °F),
with relative humidity range of 20% to 80% non-condensing.


Facility requirements:
Compressed Air: 90-110 psi with 13 CFM minimum flow


Installation requirements:
Forklift required for uncrating, installation and movement.
Crated Dimenions:
Width: 243.8 cm (96 in.)
Depth: 203.2 cm (64 in.)
Height: 254.5 cm (100.2 in.)
Crated Weight: 1724 kg (3800 lbs)