Medical Materials

//Firm, flexible, transparent biocompatible resin for patient-contact devices and anatomical models.

BioMed Flex 80A Resin is a firm, flexible, and transparent material for biocompatible applications requiring durability alongside long-term skin contact (more than 30 days) or short-term mucosal membrane contact (less than 24 hours). With an 80A Shore hardness, 135% elongation at break, and a tear strength of 22 kN/m, it delivers the mechanical resilience needed for flexible medical device components that must maintain their integrity through repeated bending, compression, and patient contact.

Its transparency makes it well-suited for anatomical models used as surgical references, allowing surgeons to visualize internal structures and plan complex procedures directly from a 3D-printed model. It also supports direct production of flexible, patient-specific medical devices and components where traditional molding workflows are too slow or costly. BioMed Flex 80A Resin is manufactured in Formlabs’ FDA-registered, ISO 13485 certified facility.

BioMed Flex 80A Resin is well-suited for medical device engineers and surgical teams who need flexible, transparent, biocompatible parts for patient-contact devices, anatomical reference models, and custom flexible medical components.

Key Benefits

• 80A Shore hardness for firm yet flexible patient-contact parts
• 135% elongation at break and 22 kN/m tear strength for durable, resilient performance
• Transparent material for anatomical models and visual inspection of internal geometry
• Validated for long-term skin contact (>30 days) and short-term mucosal membrane contact (<24 hours)
• Eliminates molding workflows for flexible, patient-specific medical device production
• Manufactured in an FDA-registered, ISO 13485 certified facility

BioMed Flex 80A Resin Compatibility

• Formlabs Form 4B & Form 4BL Medical

//Impact-resistant biocompatible resin for patient-specific instruments and high-stress medical device applications.

BioMed Durable Resin is an impact-resistant, shatter-resistant biocompatible material developed for medical device applications that demand both biocompatibility and the ability to withstand rough handling, pressure, and repeated use. With a 29.1 MPa ultimate tensile strength comparable to polypropylene, it fills the gap between the strength of rigid BioMed resins and the need for parts that resist shattering under demanding conditions — particularly in surgical and point-of-care environments where component failure is not an option.

Validated for long-term skin contact (more than 30 days), mucosal membrane contact (more than 30 hours), and short-term bone, tissue, and dentin contact (less than 24 hours), it is suited for patient-specific instruments, single-use surgical tools, and custom medical device components requiring a high degree of biocompatibility and durability. Parts are compatible with common solvent disinfection and sterilization methods, and the material is manufactured in Formlabs’ FDA-registered, ISO 13485 certified facility.

BioMed Durable Resin is well-suited for medical device engineers and surgical teams who need custom, biocompatible parts that can withstand the physical demands of clinical use without fracturing or degrading.

Key Benefits

• Impact-resistant and shatter-resistant for parts that handle rough handling and clinical stress
• 29.1 MPa ultimate tensile strength comparable to polypropylene
• Validated for long-term skin contact, mucosal membrane contact, and short-term bone, tissue, and dentin contact
• Compatible with common solvent disinfection and sterilization methods
• Ideal for patient-specific instruments, single-use surgical tools, and durable medical device components
• Manufactured in an FDA-registered, ISO 13485 certified facility

BioMed Durable Resin Compatibility

• Formlabs Form 4B & Form 4BL Medical

//Rigid, opaque biocompatible resin for medical devices requiring bone, tissue, and dentin contact.

BioMed White Resin is a rigid, opaque material for biocompatible applications requiring long-term skin contact (more than 30 days) or short-term bone, tissue, dentin, and mucosal membrane contact (less than 24 hours). Its white, opaque finish provides visual contrast that makes it easier to differentiate between substances and surfaces — particularly useful in applications where material interfaces or anatomical features need to be clearly visible.

With a 45.78 MPa ultimate tensile strength and 74.46 MPa flexural strength, it delivers strong mechanical properties for rigid medical device components. It is USP Class VI certified, making it suitable for pharmaceutical and drug delivery applications, and is compatible with common solvent disinfection and sterilization methods. BioMed White Resin is manufactured in Formlabs’ FDA-registered, ISO 13485 certified facility.

BioMed White Resin is well-suited for medical device engineers and researchers who need rigid, sterilizable, biocompatible parts for patient-specific instruments, surgical guides, wearable devices, and pharmaceutical applications.

Key Benefits

• Rigid, opaque white finish for clear visual differentiation of surfaces and material interfaces
• 45.78 MPa ultimate tensile strength and 74.46 MPa flexural strength for durable medical device components
• Validated for long-term skin contact (>30 days) and short-term bone, tissue, dentin, and mucosal membrane contact (<24 hours)
• USP Class VI certified for pharmaceutical and drug delivery applications
• Compatible with common solvent disinfection and sterilization methods
• Manufactured in an FDA-registered, ISO 13485 certified facility

BioMed White Resin Compatibility

• Formlabs Form 4B & Form 4BL Medical

//Rigid, matte biocompatible resin for opaque medical device components and patient-contact parts.

BioMed Black Resin is a rigid, matte material for biocompatible applications requiring long-term skin contact (more than 30 days) or short-term mucosal membrane contact (less than 24 hours). Its opaque black finish provides high contrast for evaluating part features and surface detail, making it useful for components where visual differentiation between surfaces, materials, or assembly interfaces is important.

With a 35.71 MPa ultimate tensile strength, 1,524 MPa tensile modulus, and 57.16 MPa flexural strength, it delivers solid mechanical performance for rigid medical device parts and production aids. Parts are compatible with common solvent disinfection and sterilization methods. BioMed Black Resin is USP Class VI certified and manufactured in Formlabs’ FDA-registered, ISO 13485 certified facility.

BioMed Black Resin is well-suited for medical device engineers who need rigid, opaque, sterilizable components for patient-contact devices, wearable medical equipment, and production tooling requiring biocompatibility.

Key Benefits

• Rigid, matte black finish for high-contrast evaluation of surface detail and assembly interfaces
• 35.71 MPa ultimate tensile strength for reliable structural performance in medical device applications
• Validated for long-term skin contact (>30 days) and short-term mucosal membrane contact (<24 hours)
• Compatible with common solvent disinfection and sterilization methods
• USP Class VI certified
• Manufactured in an FDA-registered, ISO 13485 certified facility

BioMed Black Resin Compatibility

• Formlabs Form 4B & Form 4BL Medical

//Transparent, wear-resistant biocompatible resin for drug delivery, fluidics, and breathing pathway applications.

BioMed Clear Resin is a hard, strong, and transparent biocompatible material validated for long-term skin contact (more than 30 days), breathing gas pathways, and mucosal membrane contact (more than 30 hours), as well as short-term bone, tissue, and dentin contact (less than 24 hours). Its optical clarity, wear resistance, and low water absorption make it uniquely suited for pharmaceutical, drug delivery, and fluid-handling applications where transparency is functionally important.

With a 52 MPa ultimate tensile strength, 2,080 MPa tensile modulus, and 84 MPa flexural strength, it delivers strong mechanical performance alongside its biocompatibility credentials. Parts are compatible with common solvent disinfection and sterilization methods. BioMed Clear Resin is USP Class VI certified, manufactured in Formlabs’ FDA-registered, ISO 13485 certified facility, and supported with an FDA Device Master File.

BioMed Clear Resin is well-suited for medical device engineers and researchers who need transparent, sterilizable components for drug delivery systems, fluid management devices, respiratory pathway components, and biocompatible enclosures requiring visual inspection.

Key Benefits

• Transparent material for visual inspection of internal geometry and fluid flow
• 52 MPa ultimate tensile strength and 84 MPa flexural strength for strong, rigid biocompatible parts
• Validated for breathing gas pathways, long-term skin contact, and mucosal membrane contact
• Low water absorption and wear resistance for reliable long-term performance
• USP Class VI certified and supported with an FDA Device Master File
• Manufactured in an FDA-registered, ISO 13485 certified facility

BioMed Clear Resin Compatibility

• Formlabs Form 4B & Form 4BL Medical

//High-strength, translucent biocompatible resin for rigid medical devices and patient-contact components.

BioMed Amber Resin is a strong, stiff, translucent material for biocompatible applications requiring long-term skin contact (more than 30 days) or short-term bone, tissue, dentin, and mucosal membrane contact (less than 24 hours). With a 73 MPa ultimate tensile strength and 103 MPa flexural strength, it is one of the mechanically strongest materials in the Formlabs BioMed library — well-suited for rigid, precision components where both structural performance and biocompatibility are critical requirements.

Parts are compatible with common solvent disinfection and sterilization methods, including E-beam, ethylene oxide, gamma radiation, and steam autoclaving. Its translucent amber appearance makes it useful for applications where visual inspection of part geometry or internal structures is needed. BioMed Amber Resin is manufactured in Formlabs’ FDA-registered, ISO 13485 certified facility and is USP Class VI certified.

BioMed Amber Resin is well-suited for medical device engineers and point-of-care teams who need strong, sterilizable, biocompatible parts for patient-specific instruments, surgical planning tools, and rigid medical device components.

Key Benefits

• 73 MPa ultimate tensile strength and 103 MPa flexural strength for high-performance rigid applications
• Validated for long-term skin contact (>30 days) and short-term bone, tissue, dentin, and mucosal membrane contact (<24 hours)
• Compatible with common sterilization methods including E-beam, EtO, gamma, and steam autoclave
• Translucent amber finish for visual inspection of part geometry and internal features
• USP Class VI certified
• Manufactured in an FDA-registered, ISO 13485 certified facility

BioMed Amber Resin Compatibility

• Formlabs Form 4B & Form 4BL Medical

//Soft, transparent elastomer for biocompatible applications requiring extended skin or mucosal membrane contact.

BioMed Flex 50A Resin is a soft, elastic, and transparent 3D printing material with a 50A Shore durometer, validated for biocompatible applications that require long-term skin contact (more than 30 days) or short-term mucosal membrane contact (less than 24 hours). Manufactured in a Formlabs FDA-registered, ISO 13485-certified facility, it meets the material quality and traceability standards required for medical device development and patient-contact applications.

Parts bend, stretch, and compress repeatedly without tearing, with 150% elongation at break and a tear strength of 11.0 kN/m. BioMed Flex 50A Resin is well-suited for medical device engineers and researchers who need comfortable, patient-contact components such as wearable devices, soft tissue models, orthotic liners, and flexible medical prototypes.

Key Benefits

• 50A Shore durometer for soft, silicone-like feel in patient-contact applications
• 150% elongation at break with a tear strength of 11.0 kN/m for durable, flexible parts
• Validated for long-term skin contact (>30 days) and short-term mucosal membrane contact (<24 hours)
• Transparent material for visual inspection of internal geometry and deformation
• Manufactured in an FDA-registered, ISO 13485-certified facility

BioMed Flex 50A Resin Compatibility

• Formlabs Form 4 & Form 4L
• Formlabs Form 4B & Form 4BL Medical