System Features
Build envelope (xyz):
192 x 108 x 370 mm / 7,672 cm3
(7.5 x 4.25 x 14.5 in. / 462 in3)
Maximum length on the diagonal – 220mm (8.6 in.)
Minimum feature size:
Material and design dependent, as low as 50μm
Build modes:
High Quality: 18.75um
Resolution:
4K light engine
Process energy:
UV (385nm) and thermal
Pre-Print Software:
GrabCAD Print™or optional 3rd party solutions
Regulatory compliance:
CE, FCC
System size and weight:
49 x 51 x 113cm (19 x 20 x 44 in.)
81 kg (180 lbs.)
Power requirements:
90 – 264 VAC, 50 – 60 HZ, 700 W, 1 phase
Network connectivity:
Ethernet / WiFi with secure network configuration
Ventilation:
Refer to photopolymer material MSDS or contact Stratasys rep for guidelines.
Operating conditions:
Operating temperature 15 °C to 30 °C (59 °F to 86 °F) Operating Humidity 30-70%
Gas input (optional):
Facility air or inert gases
Gas exhaust (optional):
Facility exhaust
Resin tray capacity:
2L
Resin storage temp:
Typically 15-30 °C (59-86 °F)
Printer authentication:
Cryptographically-secure handshake
Network security:
Industry-standard end-to-end encryption
Recommended UV Curing Systems:
Dymax ECE 5000
Dymax UVCS 2.0 Conveyor